WD-2112 Bronze Ball Valves with Threaded Ends

Detailed Product Description

WD-2112 Special Bronze Full Port Ball Valves with Threaded Ends.

1)Full-port design
2)Bronze body
3)Chrome plated machined brass rod ball
4)Adjustable packing nut
5)2 Non-sticking teflon seats
6)Latch locking handle or Extended lever handle.
7)Orange non-heating plastic coat
8)100% air tested under water
9)600lb. WOG (water, oil and gas)

10)Teflon packing for safety against leakage around stem
11)Rugged body and blowout proof stem construction.

.

G	DN(mm)	APPROX.W(G)	BOX/CTN	FOB/CNF PRICE
3/4"	20	510
1"	25	805
1 1/4"	32	1270
1 1/2'	40	1660
2"	50	2480

.

PART	SPECIFICATION
Handle	Zinc Plated Steel Clenr Chromate Plastisol Coated
Handle Nut	Zinc Plated Steel
Packing Gland	Brass ASTM B 16 Alloy C36000
Packing	TFE
Thrust Washer	Reinforeed TFE
Stem	Silicon Bronze ASTM B 371 Alloy C69400 or ASTM B 16 Alloy C3600
Seat Ring(2)	Reinforeed TFE
Ball	Brass ASTEM B 124 Alloy C37700 or ASRM B 16 Alloy C36000 with Hard Chrome Plate
Main Body	Bronze ASTM B 584 Alloy C84400
Coupling	ASTM B 124 Alloy C37700
Check Valve Body	Bronze ASTM B 584 Alloy C84400
Soft Disc	Buan-N
Disc Holder	Stainless Steel Type 301
Spring	Stainless Steel ASTM A 276 Type 316
Seat Screw	Stainless Steel ASTM A 276 Alloy S43000
Valve stem	Stainless Steel ASTM A 582 Alloy C30300

.

This Conventional Port Bronze Ball Valve may be used for general purpose or utility service application . Cast bronze body and end piece, blowout proof silicon bronze stem or 316 stainless steel ball and stem are optional(66 Trim) NPT threaded ends are standard. Solder end valves also available .When installing solder end valves , conventional soldering techniques should be used.

The latch lock mechanism installed on the lever secures the valve in either the open or closed position.A padlock can be installed locking the valve in open or closed position.